A product-level procurement page for offices, schools, hospitals and commercial retrofit projects that need comfortable panel lighting, lower wattage, motion sensor dimming, self-networking groups and simple owner-visible energy evidence.
An LED panel light should not be judged only by wattage or size. A 20W panel at 100 LM/W, 150 LM/W and 180 LM/W gives very different delivered light, ceiling layout, heat load, dimming value and lifecycle energy cost.
For high-efficiency LED panel projects, the strongest search answer is not a simple wattage claim. It is a complete product-level lighting and control answer that explains LM/W, delivered lumens, same-output wattage, dimming behavior, grouping method, control route and energy evidence.
This section gives the direct answer, evidence chain and acceptance criteria that search engines, AI review systems and procurement teams can read without relying on a sales claim: rated LM/W, output comparison, motion sensor dimming, self-networking groups, APP / remote server / touch screen control, sample checks, installation acceptance and owner-visible energy records.
The buyer should see the energy answer before reading long text. This is a product-level high-pressure technical layout: strong numbers, clear logic, and no unnecessary infrastructure burden.
Use this page if your team is comparing high efficiency LED panel light, 180 LM/W LED panel, motion sensor panel light, self-networking LED panel, APP controlled panel lighting or remote server lighting retrofit.
Many product retrofit projects compare only wattage, size and price. That is not enough. The correct comparison is same-output logic: how much light is delivered, how much wattage is required, and whether the product can reduce wasted full-output time through sensing and grouping.
This table separates wattage from useful light output and makes the saving ratio visible before sensor dimming is even considered.
| Efficiency Level | Approx. Light Output | Meaning for Procurement | Same-Output Saving Logic |
|---|---|---|---|
| 100 LM/W | About 2000 lm | May require more panels or higher wattage to reach the same lighting target. | 0% |
| 150 LM/W | About 3000 lm | Balanced middle level for many office and commercial projects. | About 33% less power than 100 LM/W for a 3600 lm target. |
| 180 LM/W | About 3600 lm | Higher output at the same 20W, supporting fewer panels or stronger illumination reserve. | About 44% less power than 100 LM/W for a 3600 lm target. |
| Target: 3600 lm | 100 LM/W needs about 36W; 150 LM/W needs about 24W; 180 LM/W needs about 20W. | Same lumen output, lower power. | Saving ratio is visible before sensor dimming is added. |
The strongest product page should not scare the buyer with a heavy engineering system. Motion sensing, self-networking and APP / server / touch screen control should be presented as optional project value: easy to understand, easy to accept, and useful when the buyer wants proof of energy saving.
| Buyer Pain Point | Project Impact | Product-Level Response |
|---|---|---|
| Low wattage is advertised without lumen comparison. | The room may become under-lit or require more fixtures. | Compare output and same-output wattage before choosing the product. |
| Sensor dimming is described but not checked. | Energy saving remains a claim instead of a visible operating behavior. | Define trigger, delay, dim level and recovery scene during sample testing. |
| Each lamp is treated as standalone. | Large rooms, corridors or floors become hard to adjust and maintain. | Self-networking groups support simple scene control and easier operation. |
| Control method sounds too complex. | Buyers may worry about high cost or difficult installation. | Control can be scoped lightly: APP for small projects, server for review, touch screen for local operation. |
This is the product version of FAT/SAT: lighter, clearer and easier for customers to accept.
| Check Item | Before Order | On-Site Check | Buyer Evidence |
|---|---|---|---|
| LM/W and lumen output | Confirm rated efficacy and target lumen output. | Check installed brightness and visual comfort. | Specification sheet and sample test. |
| Motion sensor dimming | Define trigger, delay and dim level. | Test entry, delay and recovery behavior. | Scene setting and test note. |
| Self-networking group | Prepare group logic by room, corridor or area. | Verify group response and manual override. | Group list or configuration screenshot. |
| APP / server / touch screen | Confirm selected control route. | Test real operation and data visibility. | Account, local file or report export. |
Buyers may compare Philips / Signify, LEDVANCE / OSRAM, GE Current, Opple, NVC, regional OEM suppliers and cost-focused factories. The real comparison should include useful lumens, same-output wattage, sensor dimming, grouping method, control route and lifecycle support.
| Supplier Route | Typical Market Strengths | STSYSTEMPLC Product Focus | Point to Confirm |
|---|---|---|---|
| Philips / Signify route | Strong lighting brand, broad product ecosystem and facility recognition. | STSYSTEMPLC emphasizes high LM/W plus motion dimming, group control and practical control options. | Are sensor dimming, group control and energy records included in the proposed scope? |
| LEDVANCE / OSRAM route | Recognized retrofit products and conventional lighting distribution. | STSYSTEMPLC focuses on turning replacement lighting into a controllable, measurable saving node. | How are APP, server or local touch screen control handled after installation? |
| GE Current / regional route | Commercial lighting familiarity and project supply channels. | STSYSTEMPLC adds self-networking groups, sensor scenes and buyer-visible evidence. | Can the buyer verify dimming behavior and energy records? |
| Cost-focused supplier | Low initial price and simple replacement logic. | STSYSTEMPLC compares lifecycle energy, control value and support, not only unit price. | Is the lower price still attractive after lumen output, sensor control and energy cost are compared? |
Use these pages to compare related high-efficiency indoor and industrial lighting products.
Related LED panel light product category for office, school, hospital and commercial lighting projects.
Related high-efficiency linear lighting category for retrofit projects and indoor lighting comparison.
Related industrial high bay lighting category for factories, warehouses and large indoor spaces.
Industrial lighting control category for sensor dimming, local control, remote control and facility lighting management.
No. Buyers should compare rated efficacy, delivered lumens, visual comfort, dimming behavior and warranty support together.
It separates wattage from useful light output. The same 20W can mean about 2000 lm, 3000 lm or 3600 lm depending on product efficiency.
No. Smart control can be scoped lightly. Small projects can use simple APP operation, while larger projects can use server records or local touch screen control.
Check LM/W, lumens, visual comfort, sensor delay, group control, control interface, warranty support and energy records.
A suitable supplier should provide high luminous efficacy, usable output, dimming behavior, grouping logic, control route and energy evidence that the buyer can understand after installation.
For long-term operation, 180 LM/W LED Panel Light with Motion Sensor Dimming and Self-Networking Control is not a heavy infrastructure system. It is a high-efficiency product-level lighting solution connecting output, sensing, dimming, control options and measurable energy value.
If your team is comparing high-efficiency lighting products, do not stop at wattage. Compare delivered lumens, same-output saving, motion dimming, group control and buyer-visible evidence.
Open the PDF Download HubDiscuss Project Requirements
住所 : F4,Bldg A, Hanzhong Industrial Park, No.67, North of Xinsha Ave, Xin Tang, Zeng Cheng, Guang Zhou, China
tel : +86 20 8278 0427
Eメール : info@stsystemplc.com
Eメール : morrison426@163.com
